BASIC INFO
Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
ATV71HD37N4Z is a kW, drive from the Altivar 71 range and is manufactured for constant torque applications using three-phase motors. Northern Industrial are specialists in supporting users of Telemecanique variable speed drives, including the ATV71HD37N4Z, and provide fast and reliable spares and repairs.
| range of product |
Altivar 71
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product specific application |
Complex, high-power machines
|
|
| component name |
ATV71
|
|
| motor power kW |
37 kWat 380...480 V 3 phases
|
|
| motor power hp |
50 hpat 380...480 V 3 phases
|
|
| motor cable length |
<= 328.08 ft (100 m) Shielded cable
<= 656.17 ft (200 m) Unshielded cable |
|
| power supply voltage |
380...480 V (- 15...10 %)
|
|
| Phase |
3 phases
|
|
| line current |
69 Afor 480 V 3 phases 37 kW / 50 hp
84 Afor 380 V 3 phases 37 kW / 50 hp |
|
| EMC filter |
Integrated
|
|
| assembly style |
With heat sink
|
|
| apparent power |
55.3 kVAat 380 V 3 phases 37 kW / 50 hp
|
|
| prospective line Isc |
<= 22 kA, 3 phases
|
|
| nominal output current |
65 Aat 2.5 kHz 460 V 3 phases 37 kW / 50 hp
79 Aat 2.5 kHz 380 V 3 phases 37 kW / 50 hp |
|
| maximum transient current |
130 Afor 2 s 3 phases 37 kW / 50 hp
118.5 Afor 60 s 3 phases 37 kW / 50 hp |
|
| output frequency |
0.1...599 Hz
|
|
| nominal switching frequency |
2.5 kHz
|
|
| switching frequency |
1...16 kHz adjustable
2.5...16 kHz with derating factor |
|
| asynchronous motor control profile |
ENA (Energy adaptation) system for unbalanced loads
Flux vector control (FVC) with sensor (current vector) Sensorless flux vector control (SFVC) (voltage or current vector) Voltage/frequency ratio (2 or 5 points) |
|
| type of polarization |
No impedance Modbus
|
| product destination |
Asynchronous motors
Synchronous motors |
|
|---|---|---|
| power supply voltage limits |
323...528 V
|
|
| power supply frequency |
50...60 Hz (- 5...5 %)
|
|
| power supply frequency limits |
47.5...63 Hz
|
|
| speed range |
1...100 asynchronous motor in open-loop mode, without speed feedback
1...50 synchronous motor in open-loop mode, without speed feedback 1...1000 asynchronous motor in closed-loop mode with encoder feedback |
|
| speed accuracy |
+/- 0.01 % of nominal speed 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback
+/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback |
|
| torque accuracy |
+/- 15 % in open-loop mode, without speed feedback
+/- 5 % in closed-loop mode with encoder feedback |
|
| transient overtorque |
220 % of nominal motor torque +/- 10 %for 2 s
170 % of nominal motor torque +/- 10 %for 60 s every 10 minutes |
|
| braking torque |
<= 150 % with braking or hoist resistor
30 % without braking resistor |
|
| synchronous motor control profile |
Vector control without speed feedback
|
|
| regulation loop |
Adjustable PI regulator
|
|
| motor slip compensation |
Adjustable
Automatic whatever the load Not available in voltage/frequency ratio (2 or 5 points) Suppressable |
|
| diagnostic |
1 LED red presence of drive voltage
|
|
| output voltage |
<= power supply voltage
|
|
| insulation |
Electrical between power and control
|
|
| type of cable for mounting in an enclosure |
With a NEMA Type1 kit: 3-strand UL 508 cableat 104 °F (40 °C), copper 75 °C PVC
With an IP21 or an IP31 kit: 3-strand IEC cableat 104 °F (40 °C), copper 70 °C PVC Without mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 70 °C PVC Without mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 90 °C XLPE/EPR |
|
| electrical connection |
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 50 mm² / AWG 1/0 |
|
| tightening torque |
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 106.19 lbf.in (12 N.m) / 102.2 lb.in
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m) |
|
| supply |
Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mAfor overload and short-circuit protection
Internal supply, 24 V DC, voltage limits 21...27 V, <= 200 mAfor overload and short-circuit protection |
|
| analogue input number |
2
|
|
| analogue input type |
AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits |
|
| input sampling time |
AI1-/Al1+ 2 ms, +/- 0.5 ms analog input(s)
Al2 2 ms, +/- 0.5 ms analog input(s) LI1...LI5 2 ms, +/- 0.5 ms discrete input(s) LI6 (if configured as logic input) 2 ms, +/- 0.5 ms discrete input(s) |
|
| response time |
<= 100 ms in STO (Safe Torque Off)
AO1 2 ms, tolerance +/- 0.5 ms analog output(s) R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms discrete output(s) R2A, R2B 7 ms, tolerance +/- 0.5 ms discrete output(s) |
|
| absolute accuracy precision |
AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C
AI2 +/- 0.6 % for a temperature variation 60 °C AO1 +/- 1 % for a temperature variation 60 °C |
|
| linearity error |
AI1-/Al1+, AI2 +/- 0.15 % of maximum value
AO1 +/- 0.2 % |
|
| analogue output number |
1
|
|
| analogue output type |
AO1 software-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits
AO1 software-configurable logic output 10 V <= 20 mA AO1 software-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits |
|
| discrete output number |
2
|
|
| discrete output type |
R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles
R2A, R2B configurable relay logic NO, electrical durability 100000 cycles |
|
| minimum switching current |
Configurable relay logic 3 mAat 24 V DC
|
|
| maximum switching current |
R1, R2 on resistive load, 5 Aat 250 V AC, cos phi = 1,
R1, R2 on resistive load, 5 Aat 30 V DC, cos phi = 1, R1, R2 on inductive load, 2 Aat 250 V AC, cos phi = 0.4, R1, R2 on inductive load, 2 Aat 30 V DC, cos phi = 0.4, |
|
| discrete input number |
7
|
|
| discrete input type |
LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm |
|
| discrete input logic |
LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0) LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0) LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0) |
|
| acceleration and deceleration ramps |
Automatic adaptation of ramp if braking capacity exceeded, by using resistor
Linear adjustable separately from 0.01 to 9000 s S, U or customized |
|
| braking to standstill |
By DC injection
|
|
| insulation resistance |
> 1 mOhm at 500 V DC for 1 minute to earth
|
|
| frequency resolution |
Analog input 0.024/50 Hz
Display unit 0.1 Hz |
|
| communication port protocol |
CANopen
Modbus |
|
| connector type |
1 RJ45 Modbus on front face
1 RJ45 Modbus on terminal Male SUB-D 9 on RJ45 CANopen |
|
| physical interface |
2-wire RS 485 Modbus
|
|
| transmission frame |
RTU Modbus
|
|
| data format |
8 bits, 1 stop, even parity Modbus on front face
8 bits, odd even or no configurable parity Modbus on terminal |
|
| number of addresses |
1...247 Modbus
1...127 CANopen |
|
| method of access |
Slave CANopen
|
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
21.65 in (550 mm)
|
|
| depth |
10.47 in (266 mm)
|
|
| width |
9.45 in (240 mm)
|
|
| product weight |
81.57 lb(US) (37 kg)
|
|
| functionality |
Full
|
|
| specific application |
Other applications
|
ATV71H075N4Z ATV71H075N4 ATV71HU15N4Z ATV71HU15N4
ATV71HU22N4Z ATV71HU22N4 ATV71HU30N4Z ATV71HU30N4
ATV71HU40N4Z ATV71HU40N4 ATV71HU55N4Z ATV71HU55N4
ATV71HU75N4Z ATV71HU75N4 ATV71HD11N4Z ATV71HD11N4
ATV71HD15N4Z ATV71HD15N4 ATV71HD18N4Z ATV71HD18N4
ATV71HD22N4Z ATV71HD22N4 ATV71HD30N4Z ATV71HD30N4
ATV71HD37N4Z ATV71HD37N4 ATV71HD45N4Z ATV71HD45N4
ATV71HD55N4Z ATV71HD55N4 ATV71HD75N4Z ATV71HD75N4
ATV71HD90N4 ATV71HC11N4 ATV71HC13N4 ATV71HC16N4
ATV71HC20N4 ATV71HC25N4 ATV71HC28N4 ATV71HC31N4
ATV71HC40N4 ATV71HC50N4 ATV71HC20N4 ATV71HC25N4
ATV71HD75N4 ATV71HU30M3 ATV71HU15N4S337 ATV71HD30M3X
ATV71HU22M3S337 ATV71HU30M3Z ATV71HU22N4S337 ATV71HD37M3X
ATV71HU30M3S337 ATV71HU40M3 ATV71HU30N4S337 ATV71HD45M3X
ATV71HU40M3S337 ATV71HU40M3Z ATV71HU40N4S337 ATV71HD55M3X
ATV71HU55M3S337 ATV71HU55M3 ATV71HU55N4S337 ATV71HD55M3XD
ATV71HU75M3S337 ATV71HU55M3Z ATV71HU75N4S337 ATV71HD75M3X
ATV71HD11M3X337 ATV71HU75M3 ATV71HD11N4S337 ATV71HD75M3XD
ATV71HD15M3X337 ATV71HU75M3Z ATV71HD15N4S337 ATV71H075N4S337
ATV71HD18M3X337 ATV71HD11M3X ATV71HD18N4S337 ATV71HD75M3X337
ATV71HD22M3X337 ATV71HD11M3XZ ATV71HD22N4S337 ATV71W075N4
ATV71HD30M3X337 ATV71HD15M3X ATV71HD30N4S337 ATV71WU15N4
ATV71HD37M3X337 ATV71HD15M3XZ ATV71HD37N4S337 ATV71WU22N4
ATV71HD45M3X337 ATV71HD18M3X ATV71HD45N4S337 ATV71WU30N4
ATV71HD55M3X337 ATV71HD22M3X ATV71HD55N4S337 ATV71WU40N4
ATV71H075M3S337 ATV71HU15M3S337 ATV71HD75N4S337 ATV71WU55N4
Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
ATV71HD37N4 ATV71HD37N4S337 ATV71HD37N4T1 ATV71HD37M3X ATV71HD37Y
ATV71HD11M3X ATV71HD11N4 ATV71HD11N4Z ATV71HD11Y ATV71HD15M3X
ATV71HD15N4 ATV71HD15N4T1 ATV71HD15N4Z ATV71HD15Y ATV71HD18M3X
ATV71HD18N4 ATV71HD18N4Z ATV71HD18Y ATV71HD22M3X ATV71HD22N4
Altivar 71 LHP: Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
- ATV71H075N4
- ATV71H075N4Z
- ATV71HU15N4
- ATV71HU15N4Z
- ATV71HU22N4
- ATV71HU22N4Z
- ATV71HU30N4
- ATV71HU30N4Z
- ATV71HU40N4
- ATV71HU40N4Z
- ATV71HU55N4
- ATV71HU55N4Z
- ATV71HU75N4
- ATV71HU75N4Z
- ATV71HD11N4
- ATV71HD11N4Z
- ATV71HD15N4
- ATV71HD15N4Z
- ATV71HD18N4
- ATV71HD18N4Z
Altivar 71 MHP: Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
- ATV71HD22N4
- ATV71HD22N4Z
- ATV71HD30N4
- ATV71HD30N4Z
- ATV71HD37N4
- ATV71HD37N4Z
- ATV71HD45N4
- ATV71HD55N4
- ATV71HD75N4
- ATV71HD75N4Z
Altivar 71 HHP: Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
- ATV71HD90N4
- ATV71HC11N4
- ATV71HC13N4
- ATV71HC16N4
- ATV71HC20N4
- ATV71HC25N4
- ATV71HC28N4
- ATV71HC31N4
- ATV71HC40N4
- ATV71HC50N4
We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
We mainly supply Yokogawa ,Honeywell,Siemens,ABB,FLUKE,Endress+Hauser,Schneider Electric,Moeller,FUJI,Omron,Pepperl+Fuchs,Hima,Yaskawa, Norgren, Hach, Weidmuller ,Phoenix,MTL,Testo etc.
Why choose us?
1. 100% original product, 100% quality assurance.
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
3.SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
Packaging:
Imported with original packaging or standard export packing.Customize design is acceptable.
Contact:
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)
